GW Instek ASR-3000 Series User Manual

ASR-3000 Series User Manual
52
USB Driver Installation
Background
If the USB Type B interface is to be used for
remote control, the USB driver needs to be
installed.
Note
The USB driver, both gw_asr.inf and gw_asr.cat
can be downloaded from the GW Instek
website.
For information on the USB interface, see page
184.
Steps
1. Connect the rear panel USB -B port on the
ASR-3000 to the PC using a USB Type A to B
cable.
2. Go the Windows Device Manager.
For Windows 7:
Start > Control Panel > Hardware and Sound
> Device Manager
Note
It is available for Windows 7 and Windows 10.

GW Instek ASR-3000 Series Specifications

General

Brand	GW Instek
Model	ASR-3000 Series
Category	Portable Generator
Language	English