GW Instek ASR-3000 Series User Manual

ASR-3000 Series User Manual
64
Basic Operation
This section describes the basic operations required to operate the
power supply.
 Select the Output Mode → from page 65
 Select the Voltage Range → from page 67
 Select the Output Waveform → from page 68
 Setting the Output Voltage Limit → from page 71
 Setting the Output AC/DC Voltage & Gain → from page 74
 Setting the Frequency Limit → from page 77
 Setting the Output Frequency & Signal → from page 80
 Setting the Peak Current Limit → from page 82
 Setting the Output Current Level → from page 84
 Setting the Output On Phase → page 86
 Setting the Output Off Phase → page 88
 Switch the Display Modes → from page 90
 Using the Measurement Function → from page 96
 Switch the Measurement Format → from page 99
 Panel Lock → from page 101
 Alarm Clear → from page 102
 Turning the Output On/Off → from page 103
Before operating the power supply, please see the Getting Started
chapter, page 9.

GW Instek ASR-3000 Series Specifications

General

Brand	GW Instek
Model	ASR-3000 Series
Category	Portable Generator
Language	English