To Next Page

To Previous Page

User Manual

11.4: SOFTWARE UPDATE

SYSTEM SETTINGS > SOFTWARE UPDATE

11.4: SETTINGS > SOFTWARE UPDATE

The Si Impact software is updated via the USB data port on the front panel. Details and special

instructionsforanyreleasewillbeincludedwiththesoftwarereleasepackage;however,the‘normal’

procedure is listed below for reference:

1.UnzipthelestoaUSBkeyintherootdirectory,youshouldhavetwoorthreeles:impact.bin;

info.xml;impactFader.hex(optional,seereleasenotes).

2. Switch the console off using the Power switch on the rear of the console. Remove any USB keys.

3. Press and hold the recessed BOOT LOADER button on the rear of the console (use a thin, blunt

tool to access it) while you turn the console on using the power switch. A Software Loader screen

will appear.

4. Insert the USB stick and then press the MENU key.

5.Selecttheinfo.xmlleusingtheadjustencoder.TheLOADbuttonatthebottomrightofthetouch

screen window will appear when a valid selection is made.

6. Press the LOAD button. Software will begin loading.

7. Wait until both progress bars have reached 100%, and the ‘tick’ symbol has appeared to the right

of each progress bar, before removing the USB stick.

NOTE: Always follow on-screen instructions and release notes as updates to fader rmware

or similar may require additional user input.

Harman Soundcraft Si impact User Manual

Questions and Answers: