HIKVISION DS-19S08N-04F/K Series User Manual

Video Security Control Panel User Manual
--22--
2.3 System Start-up
For configuring the video security control panel, you should restore the system of the control panel after start-up.
Video Security Control Panel Start-up 2.3.1
The keypad registration will be completed in 10 seconds after the video security control panel is being powered
on. The system then will complete the start-up and enter the proper status of working.
Alarm Keypad Start-up 2.3.2
The LED keypad will make continuously prompt tones if the keypad does not receive the registration respond from
the control panel in 20 seconds after it being powered on. If the registration is succeeded, the working status
indicator will turn green.
LED Alarm Keypad Arming/Disarming Status
Working Status
Indicator Status
Working Status
Indicator Status
Arming
Red (Continuously
Light)
In Programming
Green (Flickering)
Disarming
Green (Continuously
Light)
Main Operator
Password Editing
Green (Flickering)
LED Alarm Keypad Working Status
Working Status
Indicator Status
Working Status
Indicator Status
Normal
Green (Continuously
Light)
Unregistered
Red (Flickering)
System Exception
Orange (Flickering)
In Programming
Green (Flickering)
In Project
Red (Continuously
Light)
Main Code Password
Editing
Green (Flickering)
LED Alarm Keypad Channel Status
Working Status
Indicator Status
Working Status
Indicator Status
Normal
Extinguishing
Exception
Red (Continuously
Light)

HIKVISION DS-19S08N-04F/K Series Specifications

General

Brand	HIKVISION
Model	DS-19S08N-04F/K Series
Category	Control Panel
Language	English