Video Security Control Panel User Manual
Trigger Time Settings 3.1.6
For Trigger output time settings, please refer to the command below.
{1} Trigger Time Programming Address: 470
{2} Trigger No.
{3} Duration: In minute
{4} Duration: In second
{5} End the command.
The maximum duration of triggering is 99 minutes and 59 seconds. The default duration is 30 seconds.
After operating once, you can continuously configure with the command of {Project} + {Trigger No.} + {Duration} +
{#}
Siren Settings 3.1.7
For siren configuration, please refer to the command below.
{1} Siren Settings Programming Address: 471
{2} Enable/Disable Siren Command
{3} End the command.
To Next Page
Loading...
Need help?
General
