Video Security Control Panel User Manual
{5} Low Battery
{6} control panel Tampering Alarm
{7} Reserved, enter 0
{8} Main keypad Disconnection
{9} Network Exception
{10} GPRS Exception
{11} End the command.
Partition Fault Prompt Sound Settings 3.1.29
To configure the partition fault prompt sound, please see the command below.
568 01 01 1 1 1 1 1 1 1 #
1 2 4 63 5
7 8
9
10
11
{1} Partition fault display configuration Programming address: 568.
{2} The Tens’ Digit of the Partition System No.
{3} The Units’ Digit of the Partition System No.
{4} Ac Power Down
{5} Low Battery
{6} Control Panel Tampering Alarm
{7} Phone Line Disconnection
{8} Main keypad Disconnection
{9} Network Exception
{10} GPRS Exception
DHCP Settings 3.1.30
To enable the DHCP, please refer to the command below.
To Next Page
Loading...
Need help?
General
