Video Security Control Panel User Manual
The DIP switch 4 and 5 are for reservation, and should be in the status of OFF.
Factory Settings 2.3.4
If you power on the system before zone connection, a 2.2k Ohm resistance is required for bridge connection
between each zone.
Password and Report
Installer Password: 012345
Main User Password: 1234
Power Recovery Default Installer Password: No
Arming/Disarming Report: Yes
Control Panel Duress Report: N/A
CID Report:
Account#1#2: No
DIP Type: DTMF
Remote Control Programming: No