Network Video Recorder User Manual
102
Chapter 8 Smart Report
8.1 People Counting
People counting calculates the number of people entering or leaving a certain configured area and
creates daily/weekly/monthly/annual reports for analysis.
Steps
1. Go to Smart Analysis → Smart Report → Counting.
2. Select a camera.
3. Select the report type.
4. Set Date to analyze.
Figure 8-1 People Counting
5. Optional: Click Export to export the report in Microsoft Excel format.
8.2 Heat Map
Heat map is a graphical representation of data. The heat map function is used to analyze how
many people visited and stayed in a specific area.
Before You Start
The function must be supported by the connected IP camera and the corresponding parameters
must be set.
Steps
1. Go to Smart Analysis → Smart Report → Heat Map.
2. Select a camera.
3. Select the report type.
4. Set Date to analyze.
To Next Page
Loading...
Need help?
General
