Network Video Recorder User Manual
26
– To import a configuration file, select the file from the selected backup device and click
Import.
Note
After the importing process is completed, you must reboot the device to activate the settings.
2.9 Save Camera VCA Data
After saving camera VCA data to your device, you will be able to search the camera VCA data.
Go to Storage → Advanced to enable Save VCA Data via local GUI interface.
Go to Configuration → Video and Audio → Display Info. on Scream to turn on Enable Dual-VCA
via web browser.
2.10 Upgrade IP Cameras
The IP camera can be upgraded through the device.
Steps
1. Go to Camera → Camera → IP Camera → More Settings → Upgrade.
Figure 2-4 Upgrade IP Cameras
2. Select a method to upgrade your camera.
Click Online Upgrade, and click Check for Updates or Quick Upgrade
to upgrade your cameras.
Note
Your device shall be properly connected to Hik-Connect.
To Next Page
Loading...
Need help?
General
