Network Video Recorder User Manual
128
Contact your Internet service provider for details about PPPoE service.
13.3 Configure SNMP
You can configure SNMP (SNMP v2 and SNMP v3) settings to get device status and parameter
information via web browser. SNMP v3 adds cryptographic security to SNMP v2, and provides
security with authentication and privacy.
Before You Start
Download the SNMP software to receive device information via the SNMP port. By setting the trap
address and port, the device is allowed to send alarm events and exception messages to the
center.
Steps
1. Go to Configuration → Network → Advanced Settings → SNMP via web browser.
To Next Page
Loading...
Need help?
General
