Network Video Recorder User Manual
56
Chapter 5 Picture Capture
Note
This chapter is only available for certain models.
5.1 Configure Parameters
The picture refers to the live picture captured in continuous or event recording.
You can edit picture parameters in Storage → Schedule → Capture → Advanced.
Resolution
Set the picture resolution.
Picture Quality
Set picture quality to low, medium or high. Higher quality requires more storage space.
Interval
The live picture capture interval.
Capture Delay Time
The duration of capturing pictures.
5.2 Configure Capture Schedule
The device will automatically capture picture according to the schedule.
Before You Start
Ensure you have installed HDDs, or added network disks for storage.
Steps
1. Go to Storage → Schedule → Capture.
2. Select a camera.
3. Set the picture capture schedule. Refer to Configure Recording Schedule for schedule setting
details.
5.3 Configure Holiday Capture Schedule
You can set the capture schedule on holidays of the year. The recorder will follow holiday capture
To Next Page
Loading...
Need help?
General
