HIKVISION DS-7600NI-I2 Series User Manual

Network Video Recorder User Manual
171
permission to connect other devices via ONVIF protocol.
Steps
1. Go to Maintenance → System Service → ONVIF.
2. Check Enable ONVIF to enable the ONVIF access management.
Note
ONVIF protocol is disabled by default.
3. Click Add.
4. Enter User Name, and Password
Caution
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
5. Select Level as Media User, Operator or Admin.
6. Click OK.
16.12.2 IP/MAC Address Filter
The address filter decides whether to allow or forbid specific IP/MAC address to get access to your
device.
Steps
1. Go to Maintenance → System Service → Address Filter.

HIKVISION DS-7600NI-I2 Series Specifications

General

Brand	HIKVISION
Model	DS-7600NI-I2 Series
Category	Network Hardware
Language	English