HIKVISION DS-7600NI-I2 Series User Manual

Network Video Recorder User Manual
36
3.7 PTZ Control
3.7.1 Configure PTZ Parameters
Follow these procedures to set the PTZ parameters. The PTZ parameters configuration must be
done before you can control the PTZ camera.
Steps
1. Click on the quick settings toolbar of the PTZ camera.
2. Click PTZ Parameters Settings to set the PTZ parameters.
Figure 3-7 PTZ Parameters Settings
3. Edit the PTZ parameters.
Note
All the parameters should be exactly match the PTZ camera parameters.
4. Click OK to save the settings.
3.7.2 Set a Preset
Presets record the PTZ position and the status of zoom, focus, iris, etc. You can call a preset to
quickly move the camera to the predefined position.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view.

HIKVISION DS-7600NI-I2 Series Specifications

General

Brand	HIKVISION
Model	DS-7600NI-I2 Series
Category	Network Hardware
Language	English