Network Video Recorder User Manual
45
Expired Time
The expired time is period for a recorded file to be kept in the HDD. When the deadline is
reached, the file will be deleted. If you set the expired time to 0, the file will not be deleted.
The actual keeping time for the file should be determined by the capacity of the HDD.
Redundant Record/Capture
By enabling redundant record or capture you save the record and captured picture in the
redundant HDD.
4.1.2 Enable H.265 Stream Access
The device can automatically switch to the H.265 stream of IP camera (which supports H.265 video
format) for the initial access.
Go to Camera → More Settings → H.265 Auto Switch Configuration to enable the function.
4.1.3 ANR
ANR (Automatic Network Replenishment) can automatically enable SD card of network camera to
save the video in the condition of network disconnection, and can synchronize data after the
network is recovered.
Before You Start
● Ensure the network connection between your device and network cameras is valid and correct.
● Ensure the network camera has been installed with an SD card.
Steps
1. Log in your device via web browser.
2. Go to Configuration → Storage → Schedule Settings → Advanced Parameter.
3. Check Enable ANR.
4. Optional: For certain camera types, set ANR Cycle.
ANR Cycle
The camera would follow the time cycle to synchronize videos with the video recorder.
5. Click OK.
4.1.4 Manual Recording
You can click to manually start/stop recording videos at live view.
4.1.5 Configure Recording Schedule
The camera would automatically start/stop recording according to the configured recording
To Next Page
Loading...
Need help?
General
