Network Video Recorder User Manual
14
Figure 1-13 Edit Network Camera
3. Select Adding Method as Manual.
Plug-and-Play
The camera is physically connected to the PoE interface. Its parameters cannot be edited. You
can go to System → Network → TCP/IP to change IP address of PoE port.
Manual
Add IP camera without physical connection via network.
4. Enter IP address, User Name, and Password.
5. Click OK.
1.4.4 Add Solar-Powered Camera Through OTAP Protocol
Solar-powered cameras can be added to your device through OTAP protocol.
Before You Start
Ensure the network between your device and solar-powered camera is accessible through OTAP
protocol.
Steps
1. Go to Maintenance → System Service → System Service to enable Enable OTAP Network
Camera Service.
2. Go to Camera → Camera → IP Camera → More Settings → OTAP to set OTAP Server Port and
Encryption Key.
To Next Page
Loading...
Need help?
General
