9
Product Application Diagram
Figure3. Product Application Diagram
Note: DS-7604NI-S/M, DS-7604NI-S and DS-7608NI-S models provide no analog camera connections, and
DS-7604NI-S/M model has no VGA output.
Operating Your DVR
There are numerous ways to navigate and operate your DVR. You may use the Front Panel Controls, the
included IR (Infrared) Remote, a Mouse and the Soft Keyboard.
Using the Front Panel Controls
Your DVR comes with built-in front panel controls, as shown in the following figure:
Figure4. DS-7604 Series DVR Front Panel
The controls on the front panel include:
1. Status Indicators:
• POWER: the POWER indicator turns green when DVR is powered up.
• STATUS: the indicator: 1. Lights in green when the compound key (SHIFT) is used; 2.
Flickers in red when the HDD is reading/writing.
• Tx/Rx: TX/RX indictor flickers green when network connection is functioning normally.
2. IR Receiver: operation by IR remote control.
3. Compound Buttons:
• 1 MENU: (1) Enter numeral “1”; (2) Access the main menu interface
• 2ABC/F1: (1) Enter numeral “2”; (2) Enter letters “ABC”; (3) The F1 button when used in a
list field will select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
• 3DEF/F2: (1) Enter numeral “3”; (2) Enter letters “DEF”; (3) The F2 button is used to cycle
To Next Page
Loading...
Need help?
General