Network Video Recorder User Manual
99
Configure Redundant Recording and Capture
Purpose:
Enabling redundant recording and capture, which means saving the record files and captured
pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data
safety and reliability.
You must set the storage mode to Group before you set the HDD property to Redundancy. For
detailed information, please refer to Chapter 7.2.1 Configure HDD Group. There should be at
least another HDD which is in Read/Write status.
Go to Storage > Storage Device.
Select a HDD from the list and Click to enter the Local HDD Settings interface.
Set the HDD property to Redundancy.
HDD Property-Redundancy
Go to Storage > Schedule Settings > Record Schedule/Capture Schedule.
Click Advanced to set the camera recording parameters.
To Next Page
Loading...
Need help?
General