Network Video Recorder User Manual
127
Go to the Linkage Action interface of the alarm input or VCA detection (e.g., face
detection, line crossing detection, intrusion detection, etc.).
Select the PTZ Linkage.
Select the camera to perform the PTZ actions.
Select the preset/patrol/pattern No. to call when the alarm events occur.
PTZ Linkage
You can set one PTZ type only for the linkage action each time.
Configure Motion Detection Alarm
Purpose:
The motion detection enables the device to detect the moving objects in the monitoring area and
trigger the alarm.
Go to System > Event > Normal Event > Motion Detection.
To Next Page
Loading...
Need help?
General