Network Video Recorder User Manual
131
Configure Sensor Alarms
Purpose:
Set the handling action of an external sensor alarm.
Configure Alarm Input
Go to System> Event>Normal Event>Alarm Input
Select an alarm input item from the list and click .
Alarm Input
Select the alarm input type to N.C or N.O.
Edit Alarm Name.
Select Input.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Click Apply and follow the message box to reboot device to take effect the settings.
To Next Page
Loading...
Need help?
General