Network Video Recorder User Manual
49
Chapter 2 Getting Started
Start up the Device
Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the device.
Before you start:
Check that the voltage of the extra power supply is the same with the device’s requirement, and
the ground connection is working properly.
Connect the device power supply interface and electrical socket with delivered power
cable. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in
conjunction with the device. The Power button on the front panel should be red, indicating
the device is receiving the power.
Activate the Device
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser, SADP, or
Client Software.
Enter the admin password twice.
Set Admin Password
To Next Page
Loading...
Need help?
General