EasyManuals Logo
Home>HIKVISION>IP Access Controllers>DS-K1TA70MI-T

HIKVISION DS-K1TA70MI-T User Manual

HIKVISION DS-K1TA70MI-T
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Chapter 1 Overview
1.1 Overview
Face recognion terminal is a kind of access control device for face recognion, which is mainly
applied in security access control systems, such as logisc centers, airports, university campuses,
alarm centrals, dwellings, etc.
1.2 Features
Supports Vanadium Oxide uncooled sensor to measure target's temperature
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 °C, deviaon:
± 0.5 °C
Recognion distance: 0.3 to 1.8 m
Fast temperature measurement mode: Detects face and takes skin-surface temperature without
identy authencaon.
Mulple authencaon modes are available: card and temperature, face and temperature, card
and face and temperature, etc.
Face mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same
me, the authencaon or aendance is valid.
Forced mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same
me, the authencaon or aendance will be failed.
Displays temperature measurement results on the authencaon page
Triggers voice prompt when
detecng abnormal temperature
Congurable door status (open/close) when detecng abnormal temperature
Transmits online and
oine temperature informaon to the client soware via TCP/IP
communicaon and saves the data on the client soware
Face recognion duraon 0.2 s/User; face recognion accuracy rate ≥ 99%
6000 face capacity, 6000 card capacity, and 100,000 event capacity
Suggested height for face
recognion: between 1.4 m and 1.9 m
Supports 6 aendance status, including check in, check out, break in, break out, overme in,
overme out
Watchdog design and tamper funcon
Audio prompt for authencaon result
NTP, manually
me synchronizaon, and auto synchronizaon
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the
terminal is destroyed
Imports and export data to the device from the client
soware
Face Recognion Terminal User Manual
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1TA70MI-T and is the answer not in the manual?

HIKVISION DS-K1TA70MI-T Specifications

General IconGeneral
BrandHIKVISION
ModelDS-K1TA70MI-T
CategoryIP Access Controllers
LanguageEnglish

Related product manuals