To Next Page

To Previous Page

Select the card type as EM card or IC card according to the actual card type.

Serial Port

It is only available when the model is DS-K1F100-M.

Select the COM the card enrollment staon connects to.

Buzzing

Enable or disable the buzzing when the card number is read successfully.

Card No. Type

Select the type of the card number according to actual needs.

M1 Card

Encrypon

This eld is only available when the model is DS-K1F100-D8, DS-K1F100-D8E, or DS-K1F180-D8E.

If the card is M1 card, and if you need to enable the M1 Card

Encrypon funcon, you should

enable this funcon and select the sector of the card to encrypt.

Remote Mode: Issue Card by Card Reader

Select an access control device added in the client and swipe the card on its card reader to read

the card number.

7.5

Congure Schedule and Template

You can congure the template including holiday and week schedule. Aer seng the template,

you can adopt the congured template to access groups when seng the access groups, so that

the access group will take

eect in the me duraons of the template.

Note

For access group sengs, refer to Set Access Group to Assign Access Authorizaon to Persons .

7.5.1 Add Holiday

You can create holidays and set the days in the holidays, including start date, end date, and holiday

duraon in one day.

Steps

Note

You can add up to 64 holidays in the soware system.

1. Click Access Control → Schedule → Holiday to enter the Holiday page.

2. Click Add on the le panel.

3. Create a name for the holiday.

Oponal: Enter the descripons or some nocaons of this holiday in the Remark box.

Face Recognion Terminal User Manual

HIKVISION DS-K1TA70MI-T User Manual

Questions and Answers: