• Precheck
Specify the checkmode precheck option. It operates checking only (it
does not execute processing even if no error is detected.) This can be
specified at the both line-by-line mode and transaction mode.
The following table shows the overview of execution modes and options of the
configuration setting command.
Table 3-5 Execution modes and options of the configuration setting command (line-by-
line mode)
Command syntax
Syntax
check
Context
check
Configura-
tion check
Command
execution with
no error
Remarks
raidcom <action> Executed Not executed Not executed Executed Default
raidcom <action> -
checkmode precheck
Executed Not executed Not executed Not executed Check only
Table 3-6 Execution modes and options of the configuration setting command
(transaction mode)
Command syntax
Syntax
check
Context
check
Configura-
tion check
Command
execution
with no error
Remarks
raidcom -zt <script file> Executed Executed Not executed Executed Default
raidcom -zt <script file> -
load <work file>
Executed Executed Executed Executed With configuration
check
raidcom -zt <script file> -
checkmode precheck
Executed Executed Not executed Not executed Check only
raidcom -zt <script file> -
load < work file> -
checkmode precheck
Executed Executed Executed Not executed With configuration
check
Check only
Detailed description are provided in the following.
Caution: Observe the following cautions:
• For <script file>, specify an executable file name.
• For <script file>, either specify a full path name or store under the c:
\HORCM\etc folder.
• For <work file>, either specify a full path name or store in the current
directory.
Context check
This check can be performed to ensure consistent content of the created
script file. For example, it can check if the script refers to an ldev_id that is
already deleted in the preceding lines.
3-26
CCI functions
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General