Hitachi VSP F1500 User Manual

Table 1-1 Available CCI functions on the storage system models
Function
Storage system
TagmaStore
USP/NSC
USP V/VM VSP HUS VM
VSP
G1000,
VSP
G1500,
VSP
F1500
VSP Gx00
models, VSP
Fx00 models
Local copy (open) Yes Yes Yes Yes Yes Yes
Local copy (mainframe) No No Yes* No Yes No
Remote copy (open) Yes Yes Yes Yes Yes Yes
Remote copy
(mainframe)
No No Yes* No Yes No
Data protection Yes Yes Yes Yes Yes Yes
VSS configuration Yes Yes Yes Yes Yes Yes
SRM SRA Yes Yes Yes Yes Yes Yes
Provisioning (raidcom) No No Yes Yes Yes Yes
Out-of-band method No No Yes Yes Yes Yes
User authentication No No Yes Yes Yes Yes
LDEV nickname No No Yes Yes Yes Yes
LDEV group No No Yes Yes Yes Yes
Resource group No No Yes Yes Yes Yes
Resource lock No No Yes Yes Yes Yes
*If DKCMAIN Microcode version of the VSP storage system is 70-03-3x-xx/xx or later, the operation of
TrueCopy for Mainframe, Universal Replicator for Mainframe, and ShadowImage for Mainframe can be
performed from Command Control Interface.
Provisioning functions
The raidcom configuration setting command enables you to perform
provisioning functions, such as setting commands or creating LDEVs, from
CCI. For information about the configuration setting command (raidcom
command), see
Chapter 5, Provisioning operations with CCI on page 5-1.
Asynchronous command processing
For the raidcom configuration setting commands, asynchronous command
processing is used for operations that take time to process on the storage
system. Once an asynchronous command has been issued, you can execute
additional commands without having to wait for the asynchronous command
to complete. You can also monitor the completion status of asynchronous
Overview
1-3
Command Control Interface User and Reference Guide

Hitachi VSP F1500 Specifications

General

Brand	Hitachi
Model	VSP F1500
Category	Server
Language	English