Figure 5-12 Script examples of virtual volume operation (Dynamic
Provisioning for Mainframe) (2/2)
Virtual volume (Dynamic Tiering) operations
Operational flow
When using the V-VOL (Dynamic Tiering), tiers of pools must be created after
creating pools, and then the performance of pools must be monitored before
the operation. If the performance of pools are insufficient, extend the
capacity of pool volumes (addition of pool volumes) and of the V-VOL.
The following diagram shows the flow of work to use a virtual volume
(Dynamic Tiering) when operating with GUI (Storage Navigator) or CLI (CCI):
5-36
Provisioning operations with CCI
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General