Operation type Description Corresponding command
Display journal
information.
raidcom get journal [ -key <keyword>]raidcom get
journal[t]
Provisioning operations that can be performed on device
groups
You can use CCI to perform provisioning operations on device groups. When
you specify a device group, you can perform operations on all LDEVs in the
device group at the same time. For details about device groups, see
LDEV
grouping function on page 3-35.
The following table lists the provisioning operations that can be executed by
specifying a device group.
Table 5-2 Performing provisioning operations by specifying a device group
Contents of operation Command
Register a journal group to a journal raidcom add journal
Delete a journal group from a journal/delete a journal raidcom delete journal
Delete an LDEV/V-VOL raidcom delete ldev
Extend the capacity of V-VOL for Dynamic Provisioning,
Dynamic Provisioning for Mainframe, Dynamic Tiering,
active flash, Dynamic Tiering for Mainframe, or active flash
for mainframe
raidcom extend ldev
Display the LDEV information raidcom get ldev
Format an LDEV raidcom initialize ldev
Create an LU path raidcom add lun
Delete an LU path raidcom delete lun
Create a pool for Copy-on-Write Snapshot raidcom add snap_pool
Extend the capacity of a pool for Copy-on-Write Snapshot raidcom add snap_pool
Create a pool for Dynamic Provisioning, Dynamic
Provisioning for Mainframe
raidcom add dp_pool
Extend the capacity of a pool for Dynamic Provisioning,
Dynamic Provisioning for Mainframe, Dynamic Tiering,
active flash, Dynamic Tiering for Mainframe, or active flash
for mainframe
raidcom add dp_pool
Create a resource group raidcom add resource
Delete a resource group raidcom delete resource
Provisioning operations with CCI
5-13
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General