Title File name
Command
name
Configuration setting and
confirming command
\HORCM\usr\bin\raidcfg.exe raidcfg
Note:
• The \HORCM\etc\ commands are used from the console window. If these
commands are executed without an argument, the interactive mode will
start up.
• The \HORCM\usr\bin commands have no console window, and can
therefore be used from the application.
• The \HORCM\usr\bin commands do not support the directory mounted
volumes in subcommands.
• \HORCM\Tool\TRCLOG.bat is a troubleshooting tool. This tool is not
usually used.
• \HORCM\etc\rmsra.exe is the binary data used for cooperation with
VMware. This is used directly by VMware, not usually used by users.
CCI files for OpenVMS-based systems
Title File name Command name User
HORCM $ROOT:[HORCM.etc]horcmgr.exe horcmd sys
HORCM_CONF $ROOT:[HORCM.etc]horcm.conf - sys
Takeover $ROOT:[HORCM.usr.bin]horctakeover.exe horctakeover sys
Volume accessibility check $ROOT:[HORCM.usr.bin]paircurchk.exe paircurchk sys
Pair generation $ROOT:[HORCM.usr.bin]paircreate.exe paircreate sys
Pair splitting $ROOT:[HORCM.usr.bin]pairsplit.exe pairsplit sys
Pair re-synchronization $ROOT:[HORCM.usr.bin]pairresync.exe pairresync sys
Event waiting $ROOT:[HORCM.usr.bin]pairevtwait.exe pairevtwait sys
Error notification $ROOT:[HORCM.usr.bin]pairmon.exe pairmon sys
Volume checking $ROOT:[HORCM.usr.bin]pairvolchk.exe pairvolchk sys
Pair config. confirmation $ROOT:[HORCM.usr.bin]pairdisplay.exe pairdisplay sys
RAID scan $ROOT:[HORCM.usr.bin]raidscan.exe raidscan sys
RAID activity report $ROOT:[HORCM.usr.bin]raidar.exe raidar sys
Connection confirmation $ROOT:[HORCM.usr.bin]raidqry.exe raidqry sys
Trace control $ROOT:[HORCM.usr.bin]horcctl.exe horcctl sys
HORCM activation script $ROOT:[HORCM.usr.bin]horcmstart.exe horcmstart.sh sys
HORCM shutdown script $ROOT:[HORCM.usr.bin]horcmshutdown.exe horcmshutdown.sh sys
Connection confirmation $ROOT:[HORCM.usr.bin]inqraid.exe - sys
CCI software environment
2-39
Command Control Interface User and Reference Guide