Category Error code Error message Value
EX_INVCMD Invalid RAID command 240
Communication for
HORCM
(Recoverable)
EX_ATTHOR Can't be attached to HORC manager 251
EX_ATTDBG Can't be attached to a Debug layer 250
EX_COMERR Can't be communicated with HORC manager 255
Resource
(Unrecoverable)
EX_ENOMEM Not enough core 245
Specific error codes
The following table lists the specific error codes returned by the following
commands:
•
horctakeover
• paircurchk, paircreate, pairsplit, pairresync, pairevtwait,
pairvolchk, pairsyncwait, raidvchkset
In this table, "Unrecoverable" indicates errors that cannot be recovered by
reexecuting the command, and "Recoverable" indicates errors that can be
recovered by reexecuting the command.
See the Command Control Interface Command Reference for more
information on error codes for each command.
Table 9-5 Specific error codes
Category Error code Error message Value
Volume Status
(Unrecoverable)
EX_ENQVOL Unmatched volume status within the group 236
EX_INCSTG Inconsistent status in group 229
EX_INVVOL Invalid volume status 222
EX_EVOLCE Pair Volume combination error 235
EX_INVSTP Invalid pair status 228
EX_VOLCUR S-VOL currency error 225
EX_VOLCUE Local Volume currency error 224
EX_VOLCRE Local and Remote Volume currency error 223
EX_EWSUSE Pair suspended at WAIT state 234
EX_ENQSIZ Unmatched volume size for pairing 212
EX_ESVOLD S-VOL denied due to be disabling 209
EX_EPRORT Mode changes denied due to retention time 208
Timer
(Recoverable)
EX_EWSTOT Timeout waiting for specified status 233
Troubleshooting
9-21
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General