Global storage virtualization function
The global storage virtualization function enables you to minimize rewrites of
configuration definition files (horcm*.conf) when you operate volumes
migrated from older models to the VSP G1000, VSP G1500, VSP F1500, VSP
Gx00 models, or VSP Fx00 models. You can also minimize the modification of
the script file that you used for the older models, when you operate volumes
using the script file created by you. For details about the global storage
virtualization function, see the Provisioning Guide for the storage system.
Volume migration (nondisruptive migration) from older models by using the
global storage virtualization function is supported only on the VSP G1000,
VSP G1500, VSP F1500, VSP Gx00 models, and VSP Fx00 models.
System configuration example with the global storage virtualization
function
This topic shows a system configuration with the global storage virtualization
function. In this configuration, a virtual storage machine is created in two
storage systems respectively. Volumes in the virtual storage machine are
given virtual LDEV IDs.
• Primary site
¢
Storage system: VSP G1000 (S/N: 67000)
¢
Virtual storage machine: VSP (S/N: 65000)
¢
LDEV ID of VSP G1000: 10:00 and 10:01
¢
Virtual LDEV ID: 01:00 and 01:01
• Secondary site
¢
Storage system: VSP G1000 (S/N: 68000)
¢
Virtual storage machine: VSP (S/N: 66000)
¢
LDEV ID of VSP G1000: 10:00 and 10:01
¢
Virtual LDEV ID: 02:00 and 02:01
3-54
CCI functions
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General