This option is used for displaying usable LBA on a Physical drive in units of
512 bytes, and is used to specify [slba] [elba] options for raidvchkset
command.
C:\HORCM\Tool>inqraid -CLI -gplbaex hd10,13
Harddisk10 : SLBA = 0x0000003f ELBA = 0x013fe5d9 PCNT = 1
[OPEN-V ]
Harddisk11 : SLBA = 0x00000022 ELBA = 0x013fffdf PCNT = 2
[OPEN-V ]
Harddisk12 : SLBA = 0x00000022 ELBA = 0x013fffdf PCNT = 3
[OPEN-V ]
SLBA: displays usable starting LBA in units of 512 bytes
ELBA: displays usable ending LBA (ELBA -1) in units of 512 bytes
PCNT: displays the number of partitions
Directory mount facility for Windows systems
The attached mountvol command into Windows supports the directory
mount, but it does not support the directory mount function that flushes the
system buffer associated to a logical drive such as in UNIX systems. The
directory mount structure on Windows is only symbolical link between a
directory and Volume{guid}, illustrated in
Figure 8-5 Directory mount
structure on page 8-12 below. As such, CCI supports the function to
discover the mounted volumes by a directory, and supports the operation to
mount/unmount with the subcommand option.
Figure 8-5 Directory mount structure
Volume discovery for directory mounted volume: CCI can discover the
directory mounted volume by using $LETALL that shows the relationship
between logical drive and the physical volumes. The KEY WORD
8-12
Examples of using CCI commands
Command Control Interface User and Reference Guide
To Next Page
Loading...
Need help?
General