Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
Infotainment System 95
.
Once the Infotainment system
finishes reading the information
on the device that supports MTP
(Media Transfer Protocol), it will
be automatically played. (If you
set the USB Auto Launch to off
in SETTINGS, it will not be
automatically played.)
.
If a non-readable device that
supports MTP (Media Transfer
Protocol) is connected, then an
error message will appear and
the Infotainment system will be
automatically switched to the
previous audio function.
Note
.
Depending on the connected
device, some files may not be
played.
.
File loading may take a few
minutes depending on the type
of phone or the number of files/
folders stored in the phone.
.
When you connect the MTP
device, the Infotainment system
scans audio files first and then
scans picture and movie files.
While scanning picture or movie
files, these files may not be
available until the loading
indicator on the audio screen
disappears, even if an audio file
in the MTP device is playing.
.
If you connect an MTP device
that has external memory, it may
be recognised as USB1/USB2.
.
Other operations are the same
as a USB player. For details,
refer to “USB player” in the “USB
port” section.
.
To operate an MTP connection
the user may be required to
change the USB connection
setting to MTP on the device.
iPod/iPhone player
Limited to models supporting the
iPod/iPhone connection
Playing music files of iPod/iPhone
Connect the iPod/iPhone containing
the music files to the USB port.
.
Once the Infotainment system
finishes reading the information
on the iPod/iPhone, it will be
automatically played from the
previously played point. (If you
set the USB Auto Launch to off
in SETTINGS, it will not be
automatically played.)
To Next Page
Loading...
Need help?
General
