Holden VF Ute Owner Manual (Holden-Localizing-Holden-6070613) - 2014 -
1st Edition - 4/3/13
Lighting 6-3
The automatic headlamp system
defaults to on with each ignition
cycle.
{
Warning
The automatic headlamp sensor
cannot replace the driver's
personal judgement of the
prevailing light conditions. For
example, the sensor is unable to
detect foggy conditions.
In situations such as this, set the
lamp switch to
2, otherwise your
safety and that of other road
users could be endangered.
Lights On with Wipers
If the windscreen wipers are
activated in daylight with the engine
on, and the exterior lamp control is
in AUTO, the headlamps, park
lamps, and other exterior lamps
come on. The transition time for the
lamps coming on varies based on
wiper speed. When the wipers are
not operating, these lamps turn off.
Move the exterior lamp control to
P
or ; to disable this feature.
Hazard Warning Flashers
Press | to turn the hazard warning
flasher on or off, when the ignition is
in any position.
All turn signals flash continuously.
Use the hazard warning flasher if
the vehicle becomes a traffic
hazard, day or night.
Note: Using hazard warning
flashers while the vehicle is moving,
is illegal in some States and
Countries.
Turn and Lane-Change
Signals
.
Push the lever in the direction
the steering wheel is turned.