Holden VF Ute Owner Manual (Holden-Localizing-Holden-6070613) - 2014 -
1st Edition - 4/3/13
3-6 Seats and Restraints
Three-Point Seat Belt
Fitting
The belt should not be twisted.
It should lie flat and fit firmly across
your hips.
1. Pull the metal tongue across
your body.
2. Clip it into the buckle.
3. When the metal tongue is locked
safely into place you will hear a
click.
4. Give a gentle pull on the buckle
to ensure full engagement.
5. Settle the belt at the hip.
6. Run your hand under the sash
from hip to shoulder.
The belt should fit comfortably. Any
extra belt length retracts
automatically.
Note: For your safety, wear the lap
section of the seat belt as low as
possible on your hips, not on your
waist or abdomen.
The Emergency-locking Retractor
Belt allows you to move while the
vehicle is travelling normally, but
locks immediately on fast braking,
impact with a solid object or any
quick movement by the wearer.
Removing
1. Press the release button on the
buckle.
2. Allow the belt to retract.
3. Check that it fully retracts
without twisting or turning.
To Next Page
Loading...
Need help?
General
