Holden VF Ute Owner Manual (Holden-Localizing-Holden-6070613) - 2014 -
1st Edition - 4/3/13
10-18 Vehicle Care
Headlamps
Front lamp access
1. Open the bonnet.
2. Locate the coolant reservoir to
access driver side:
.
Front park bulb
.
Low beam bulb
.
High beam bulb
3. Pull up on the coolant reservoir
filler neck (including the cap).
4. Drain the filler neck before
pulling out.
Place a clean rag over the
opening of the coolant reservoir.
1. Open the bonnet.
2. Locate the air filter box to
access passenger side:
.
Front park bulb
.
Low beam bulb
.
High beam bulb
3. Unclip the air filter box cover and
move rearward.
4. Disconnect the air flow meter
connector (1) (V8 only).
Front lamp assembly