EasyManuals Logo

HOLDEN VF UTE 2014 User Manual

HOLDEN VF UTE 2014
328 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #197 background imageLoading...
Page #197 background image
Black plate (7,1)
Holden VF Ute Owner Manual (Holden-Localizing-Holden-6070613) - 2014 -
1st Edition - 4/3/13
Driving and Operating 9-7
ON/RUN/START (Green Indicator
Light): This mode is for driving and
starting. With the ignition off, and
the brake pedal applied, pressing
the button once will place the
ignition system in ON/RUN/START.
Once engine cranking begins,
release the button. Engine cranking
will continue until the engine starts.
See Starting the Engine on
page 9-7 for more information. The
ignition will then remain in ON/RUN.
Service Only Mode
This power mode is available for
service and diagnostics, and to
verify the proper operation of the
malfunction indicator lamp as may
be required for emission inspection
purposes. With the vehicle off, and
the brake pedal not applied,
pressing and holding the button for
more than five seconds will place
the vehicle in Service Only Mode.
The instruments and audio systems
will operate as they do in ON/RUN,
but the vehicle will not be able to be
driven. The engine will not start in
Service Only Mode. Push the button
again to turn the vehicle off.
Starting the Engine
1. Apply the park brake. Release it
only after starting the engine and
you are ready to drive off.
2. Automatic transmission: Move
the shift lever to position P or N.
The engine will not start if the
shift lever is in any other
position.
Manual transmission: Push the
clutch pedal to the floor, move
the shift lever to the neutral
position then start the engine.
3. Turn the key to the START
position momentarily and
release it. The engine starts
automatically. The key
automatically returns to the ON
position.
Keyless start: When the ignition
is off and the brake pedal is
applied, press the ENGINE
START/STOP button once and
release when engine cranking
begins. Engine cranking will
continue until the engine starts.
Note:
.
Manual transmission: The clutch
must be pushed to the floor
while turning the key, or the
vehicle cannot be started.
.
Do not press the accelerator
pedal while starting the engine.
.
Do not subject the engine to full
throttle acceleration or high
speeds until it has reached
normal operating temperature.
Premature engine wear or
damage may result.
Retained Accessory
Power (RAP)
The power windows will operate
when the key is in the ON or
ACCESSORIES positions.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HOLDEN VF UTE 2014 and is the answer not in the manual?

HOLDEN VF UTE 2014 Specifications

General IconGeneral
BrandHOLDEN
ModelVF UTE 2014
CategoryAutomobile
LanguageEnglish

Related product manuals