CRANKCASE
CRANKCASE COVER REMOVAL/INSTALLATION
Drain the engine oil (page 3-4).
Remove the key (7 x 7 x 33 mm) / (6.3 x 6.3 x 43 mm) (If equipped).
DOWEL PIN (8 x 12 mm) (2)
CASE COVER PACKING
CRANKCASE COVER
(Without reduction type)
OIL FILLER CAP
OIL FILLER CAP PACKING (2)
OIL FILLER CAP
(With oil level gauge)
24 N·m (2.4 kgf·m, 17 lbf·ft)
BOLT (8 x 40 mm) (7)
CRANKCASE COVER
(With reduction type)
KEY (7 x 7 x 33 mm)
/ (6.3 x 6.3 x 43 mm)
(If equipped)
(Oil seal lip)
(Bearing)
To Next Page
Loading...
Need help?
General
