MAINTENANCE
SEDIMENT CUP CLEANING
Turn the fuel valve lever (1) to the OFF position.
Remove the sediment cup (2) and the O-ring (3).
Release the tabs (5) and remove the cup filter (4).
Clean the sediment cup and the cup filter with
non-flammable solvent and allow them to dry
thoroughly.
Install the cup filter as the direction shown in the
illustration.
Install a new O-ring and tighten the sediment cup to the
specified torque.
Check the sediment cup for any sign of fuel leakage.
Gasoline is highly flammable and explosive. You
can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
TORQUE:3.9 N·m (0.40 kgf·m, 2.9 lbf·ft)
(1)
OFF
ON
(3)
(2)
(4)
(5)
(5)
(5)
(5)
UNDER VIEW:
CARBURETOR
BOSS
BOSS
To Next Page
Loading...
Need help?
General
