EasyManuals Logo
Home>Honda>Engine>GX390UT2

Honda GX390UT2 User Manual

Honda GX390UT2
329 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
MAINTENANCE
ENGINE OIL CHANGE
Drain the oil in the engine while the engine is warm.
Warm oil drains quickly and completely.
Place the engine on a level surface, and place a
suitable container under the drain plug bolt.
Remove the oil filler cap (1), drain plug bolt (2), and
drain plug washer (3) to drain the oil into the suitable
container.
Please dispose of used motor oil in a manner that is
compatible with the environment. We suggest you take
used oil in a sealed container to your local recycling
center or service station for reclamation. Do not throw it
in the trash, pour it on the ground, or pour it down a
drain.
Install a new drain plug washer (3) and tighten the drain
plug bolt (2) to the specified torque.
Fill with recommended oil to the upper level mark of the
oil level dipstick (page 3-3
).
Engine oil capacity: 1.1 (1.16 US gal, 0.97 Imp gal)
Tighten the oil filler cap securely.
Used engine oil contains substances that have
been identified as carcinogenic. If repeatedly left in
contact with the skin for prolonged periods, it may
cause skin cancer. Wash your hands thoroughly
with soap and water as soon as possible after con-
tact with used engine oil.
TORQUE: 22.5 N·m (2.25 kgf·m, 17 lbf·ft)
(1)
(2)
(3)
gx240ut2_gx270ut2_gx340ut2_gx390ut2

Table of Contents

Other manuals for Honda GX390UT2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda GX390UT2 and is the answer not in the manual?

Honda GX390UT2 Specifications

General IconGeneral
BrandHonda
ModelGX390UT2
CategoryEngine
LanguageEnglish

Related product manuals