Honda NU50 User Manual

DRIVE PULLEY/KICK STARTER/CLUTCH/DRIVEN PULLEY
BEARING REPLACEMENT
Remove the oil seal Bnd drive out the bearing_
Pack
all bearing cavities with grease.
Install a
new bearing from inside of the cover and
install a new oil seal.
OIL SEAL
DRIVE BELT REMOVAL
Expand the movable driven lace enough to remove
the drive belt Ihen remove the drive belt.
CAUTION:
Do not bend the drive bell or it will be dam-
aged.
..
DRIVE BEl T
r:::itI HONDA
~ NUSO· NUSOM
DRIVER HANDLE
~
ATTACHMENT 32 Ie 35 mm
PILOT. 15mm
MOVABLE DRIVEN FACE
DRIVE BELT INSPECTION
Check thc drive belt for cracks, separation or abnor-
mal or excessive wear.
Measure the drive belt's width.
SERViCE LIMIT: 13.0 mm {D.S1 in}
8-4
70
Date of Issue: Nov., 1981
© HONDA MOTOR CO., LTD.

Honda NU50 Specifications

General

Brand	Honda
Model	NU50
Category	Scooter
Language	English