Servicing Your Honda
134
Tool Kit
The tool kit (1) and gear change tool (2) are stored in the storage
compartment (page 60).
After using the tool kit or the gear change tool, be sure to use the
rubber band (3) to fasten the tool kit and the gear change tool
securely.
The tools in the kit are sufficient to perform routine maintenance
and simple repairs. Any extensive work requiring additional tools
should be performed by your dealer.
The tool kit and gear change tool includes the following items:
* standard/Phillips screwdriver
* screwdriver handle
* 10 × 12 mm open end wrench
* 14 × 17 mm open end wrench
* spark plug wrench and handlebar
* pliers
* tool case
* 5 mm hex wrench
REAR
(2)
(1)
(3)
(1) tool kit
(2) gear change tool
(3) rubber band
19 TRX500FA6 (ED)-32HR66400.book 134 ページ ２０１８年５月２２日 火曜日 午前１１時８分
To Next Page
Loading...
Need help?
General
