9 - 3
MICR E-13B Font
MICR E-13B On
allows you to scan MICR characters on a bank check. The
default setting allows you to scan any eight digit combination. If you have
created an OCR template, character combinations that fit the template can be
scanned (see Creating an OCR Template, page 9-4).
Note: TOAD characters (Transit, On Us, Amount and Dash) are output in the
following manner:
SEMI Font
SEMI Font On
allows you to scan the SEMI font used in the semiconductor
industry.
All OCR Off
turns off all OCR capability in the imager, so the imager will be able
to scan linear, stacked, matrix, and composite bar codes, but not OCR fonts.
However, any OCR templates you have created will be retained in memory.
the transit character is output as T
the amount character is output as A
the on us character is output as O
the dash character is output as D
To Next Page
Loading...
Need help?
General
