Honeywell 5110 User Manual

4 - 17
Scan Centering On , then scan one of the following bar codes to change the top,
bottom, left, or right of the centering window. Then scan the percent you want to
shift the centering window using digits on the inside back cover of this manual.
Scan
Save . Default Centering = 40% for Top and Left, 60% for Bottom and
Right.
Decode Search Mode
There are three selectable decode (scanning) modes:
Full Omnidirectional - Searches for bar code features beginning at the center
of an image, and searches to the image’s limits. This mode reads all
symbologies (including OCR), in any orientation. The Full Omnidirectional
search is very thorough which may slow performance time.
Note: This search mode is the default setting for the 2D OEM Engines.
Left of Centering Window
Top of Centering Window
Right of Centering Window
Bottom of Centering Window
* Centering Off
Centering On
Full Omnidirectional

Honeywell 5110 Specifications

General

Brand	Honeywell
Model	5110
Category	Safes
Language	English