10 - 2
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your imager, or you’ve
changed some options and want the standard product default settings restored,
scan the
Standard Product Default Settings
bar code below.
The Menu Commands starting on page 11-5 lists the standard product default
settings for each of the commands (indicated by an asterisk (*) on the
programming pages).
Test Menu
When you scan the Test Menu
On
code, then scan a programming code in this
manual, the imager displays the content of a programming code. The
programming function will still occur, but in addition, the content of that
programming code is output to the terminal.
Note: This feature should not be used during normal imager operation.
2D PQA (Print Quality Assessment)
Two-dimensional Print Quality Assessment (2D PQA) is a feature of Honeywell’s
image readers where the data from the successful read of a 2D bar code symbol
is augmented with lines of text that both identify the symbol, and also report
graded measurement parameters obtained from it.
To see displayed results, Microsoft
®
Notepad, a word processor/editing
program, or Quick*View (page 10-5) is recommended. For additional
information on interpreting your read results, please refer to Honeywell’s Quick
Check 2D Print Assessment User’s Guide.
Standard Product Default Settings
To Next Page
Loading...
Need help?
General
