Honeywell 5110 User Manual

3 - 1
3
Terminal Interfaces
Terminal ID
If you want to change the pre-programmed interface of your image engine, refer
to Supported Terminals, below.
For example, a USB HID POS device has a Terminal ID of 131. You would scan
the Terminal ID bar code, then 1, 3, 1 from the Programming Chart inside the
back cover of this manual, then Save. If you make an error while scanning the
digits (before scanning Save), scan the Discard code on the Programming
Chart, scan the Terminal ID bar code, scan the digits, and the Save code again.
Note: After scanning one of these codes, you must power cycle your computer.
Supported Terminals
Terminal Model(s)
Terminal
ID
IBM SurePOS USB Handheld Imager
128
IBM SurePOS USB Tabletop Imager
129
RS-232 True
000
RS-232 TTL
000
USB COM Port Emulation
130
USB PC Keyboard
124
USB Mac Keyboard
125
USB HID POS
131
USB Japanese Keyboard
134
Terminal ID
Save

Honeywell 5110 Specifications

General

Brand	Honeywell
Model	5110
Category	Safes
Language	English