Honeywell 5110 User Manual

7 - 6
Code 39
< Default All Code 39 Settings >
Code 39
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.
Default = Don’t
Transmit.
Code 39 Check Character
No Check Character indicates that the imager reads and transmits bar code
data with or without a check character.
* On
Off
Transmit
* Don’t Transmit

Honeywell 5110 Specifications

General

Brand	Honeywell
Model	5110
Category	Safes
Language	English