Honeywell NOTIFIER UDACT User Manual

UDACT Instruction Manual — P/N 50050:M 12/18/2009 85
Point Assignments AFP-300 & AFP-400 (UL 8th)
E.7 Point Assignments
Use chart to carefully identify all points in the system. Take special precaution with any
supervisory points and remote switches in the system. Use Type Mode (refer to "Type Mode" on
page 52) to match the function of remaining zones in the system for proper reporting.
If using an AFP-300, use only “Module Loop 1” or “Detector Loop 1”.
Table E.2 Point Assignments - AFP-300/AFP-400, Part One
Point
No
Type of Device:
Module Loop 1
Point
No
Type of Device:
Module Loop 1
Point
No
Type of Device:
Module Loop 2
Point
No
Type of Device:
Module Loop 2
001 051 101 151
002 052 102 152
003 053 103 153
004 054 104 154
005 055 105 155
006 056 106 156
007 057 107 157
008 058 108 158
009 059 109 159
010 060 110 160
011 061 111 161
012 062 112 162
013 063 113 163
014 064 114 164
015 065 115 165
016 066 116 166
017 067 117 167
018 068 118 168
019 069 119 169
020 070 120 170
021 071 121 171
022 072 122 172
023 073 123 173
024 074 124 174
025 075 125 175
026 076 126 176
027 077 127 177
028 078 128 178
029 079 129 179
030 080 130 180
031 081 131 181
032 082 132 182
033 083 133 183
034 084 134 184
035 085 135 185
036 086 136 186
037 087 137 187
038 088 138 188
039 089 139 189
040 090 140 190
041 091 141 191
042 092 142 192
043 093 143 193
044 094 144 194
045 095 145 195
046 096 146 196
047 097
Do Not
Program
147 197
Do Not
Program
048 098 148 198
049 099 149 199
050 100 150 200

Honeywell NOTIFIER UDACT Specifications

General

Brand	Honeywell
Model	NOTIFIER UDACT
Category	Cell Phone
Language	English