UDACT Instruction Manual — P/N 50050:M 12/18/2009 17
Section 2: Installation and Wiring
2.1 Installation
2.1.1 Options
The UDACT is either installed internally in the FACP cabinet or remotely in an ABS-8RB or UBS-
1 enclosure. The following table contains information specific to each FACP that is compatible
with the UDACT. See "Internal Installation" on page 18 for instructions on internal installation and
"Remote Installation" on page 22 for instructions on remote installation. Additional information
required for installing the UDACT in a specific Fire Alarm Control Panel will be found in the
appropriate appendix relating to that panel.
Table 2.1 Installation Options
Fire Alarm Control
Panel
Cabinet Style Where Installed
AFP-100 SBB-1 Internal or Remote
AFP-200 AFP-200 Cabinet Remote Only
AFP-300/AFP-400 CAB-400AA Remote Only
CAB-3/4 Series Internal or Remote
System 500 CAB-500 Remote Only
System 5000 CAB-3/4 Series Internal or Remote
AM2020/AFP1010 CAB-3/4 Series Internal or Remote
NCA-2 CAB-3/4 Series Internal or Remote
NCA CAB-3/4 Series Internal or Remote
NFS2-640 CAB-3/4 Series Internal or Remote
NFS-320 NFS-320 Cabinet Internal or Remote
NFS-640 CAB-3/4 Series Internal or Remote
NFS2-3030 CAB-3/4 Series Internal or Remote
NFS-3030 CAB-3/4 Series Internal or Remote
To Next Page
Loading...
Need help?
General
