Do you have a question about the Honeywell SPM Flex and is the answer not in the manual?
Brand | Honeywell |
---|---|
Model | SPM Flex |
Category | Security Sensors |
Language | English |
Details on fixed installation configuration and components.
Lists optional accessories for detector enhancement and functionality.
Describes common wiring configurations for fixed detector installations.
Details the Ethernet port and the internal terminal module for connections.
Illustrates various wiring diagrams for different configurations, including 4-20 mA.
Explains the three-wire connection for 4-20 mA output, including sink, source, and isolated.
Covers relay configuration and Modbus/TCP server capabilities for data communication.
Provides a detailed table of Modbus register addresses, bits, descriptions, and values.
Details sample and exhaust tubing specifications and calculations for optimal performance.
Provides technical drawings for detector installation, including dimensions and mounting.
Details the physical dimensions of the SPM Flex detector in inches and centimeters.
Describes available mounting bracket options for fixed detector installations.
Illustrates the standard mounting bracket and its installation dimensions.
Details the mounting bracket for replacing older SPM detector models.
Describes the sun shield for outdoor applications, protecting the detector from elements.
Explains how to rotate the display for optimal viewing in different installation orientations.
Procedure for converting a fixed installation detector into a portable unit.
Discusses the importance and types of in-line filters for detector protection.
Details the use and limitations of the optional sampling wand for specific gas detection.
Covers power-up sequence, battery status, and powering the detector off.
Explains the use of control buttons for menu navigation and operation.
Details the real-time clock, audible alarm settings, and status monitoring icons.
Describes how battery level and gas concentration are displayed on the detector.
Details how to enable or disable alarms and faults for specific periods.
Covers accessing event history, Chemcassette details, and gas settings.
Details network summary and additional status information like flow rate and battery.
Covers software versions and access to the maintenance menu functions.
Explains flow optimization and general setup configurations for the detector.
Discusses gas monitoring settings, latching options, and alarm volume.
Describes how to enable and configure Ethernet connection and Modbus TCP.
Details the detector's security levels and access rights based on passcodes.
Covers configuration manager, test menu options, and duty cycle settings.
Explains gas cross-sensitivity adjustment and stale tape fault management.
Provides a table of symptoms, causes, and corrective actions for common detector problems.
Lists and explains various instrument and maintenance fault codes.
Outlines recommended maintenance intervals and authorized service recommendations.
Step-by-step guide for replacing the end-of-line filter.
Procedures for checking pump functionality and verifying optic system response.
Instructions for removing and replacing internal dust and acid scrubber filters.
Detailed procedure for replacing the detector's pump assembly.
Guidance on diagnosing and resolving stepper and gate motor malfunctions.
Instructions for battery replacement and cleaning exterior surfaces.
Procedures for cleaning tape transport surfaces to prevent false readings.
Methods for verifying the integrity of tubing connections and detecting system leaks.
Guidelines for proper storage of the detector and end-of-life recycling.