1-14
Introducing the HP 2920 Switches
HP 2920 10G Expansion Modules
10G Expansion Module Slots
Each of the HP 2920 switches has two slots that can accept the two HP 2920
10G Expansion Modules. These modules provide additional high-speed
network connectivity:
■ a 2-port 10-GbE SFP+ module. This module provides two bays for SFP+
transceivers:
■ a 2-port 10GBASE-T module. This module provides two 10GBASE-T
RJ-45 connectors.
Stacking Module Slot
Each of the HP 2920 switches has one slot that can accept the HP 2920 Stacking
Module that provides high-speed connectivity to other HP 2920 switches. Only
the HP 2920 switches support this module. See “HP 2920 Stacking Module” on
page 1-17 for more information.
HP 2920 10G Expansion Modules
The HP 2920 10G Expansion Modules are components you can add to a HP
2920 Switch to provide a variety of network connectivity options. The
following modules are available:
Module Description
HP 2920 2-Port 10-GbE
SFP+ Module (J9731A)
2-port 10 Gigabit switch expansion
module. This module has two slots
for HP SFP+ transceivers.
HP 2920 2-Port
10GBASE-T Module
(J9732A)
2-port 10 Gigabit switch expansion
module. This module has two
10GBASE-T RJ-45 ports.
To Next Page
Loading...
Need help?
General