HP 3600 v2 Series Configuration Guide

150
Follow these guidelines to specify an auto redirection URL for authenticated portal users:
• To use this feature for remote Layer 3 portal authentication, the portal server must be the IMC portal
server that supports the page auto-redirection function.
• The wait-time period option is effective to only local portal authentication.
• When no auto redirection URL is specified for authenticated portal users, an authenticated user is
usually redirected to the URL the user typed in the address bar before portal authentication.
However, with local portal authentication, if the URL a user typed in the address bar before portal
authentication is more than 255 characters, the user cannot be redirected to the page of the URL
after passing portal authentication.
To specify an auto redirection URL for authenticated portal users:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Specify an auto redirection
URL for authenticated portal
users.
portal redirect-url url-string [ wait-time
period ]
By default, an authenticated
user is redirected to the URL
the user typed in the address
bar before portal
authentication.
Configuring portal detection functions
Configuring online Layer 2 portal user detection
Only Layer 2 portal authentication supports this feature.
After a Layer 2 portal user gets online, the device starts a detection timer for the user, and checks whether
the user's MAC address entry has been aged out or the user's MAC address entry has been matched (a
match means a packet has been received from the user) at the interval. If the device finds no MAC
address entry for the user or receives no packets from the user during two successive detection intervals,
the device considers that the user has gone offline and clears the authentication information of the user.
To set the Layer 2 portal user detection interval:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Set the Layer 2 portal user
detection interval.
portal offline-detect interval
offline-detect-interval
300 seconds by default
Configuring the portal server detection function
Only Layer 3 portal authentication supports this feature.
During portal authentication, if the communication between the access device and portal server is
broken, new portal users are not able to log on and the online portal users are not able to log off normally.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English